NEWS
NEWS
Your location:
Homepage
/
/
/
Common fastener materials and uses

Common fastener materials and uses

  • Categories:Industry News
  • Author:
  • Origin:
  • Time of issue:2021-07-21
  • Views:0

(Summary description)1. Classification of commonly used materials of Ziwei: At present, the standard parts on the market mainly include carbon steel, stainless steel, brass, and aluminum alloy.

Common fastener materials and uses

(Summary description)1. Classification of commonly used materials of Ziwei: At present, the standard parts on the market mainly include carbon steel, stainless steel, brass, and aluminum alloy.

  • Categories:Industry News
  • Author:
  • Origin:
  • Time of issue:2021-07-21
  • Views:0
Information

1. Classification of commonly used materials of Ziwei: At present, the standard parts on the market mainly include carbon steel, stainless steel, brass, and aluminum alloy.
1 Carbon steel. We distinguish low-carbon steel, medium-carbon steel, high-carbon steel, and alloy steel based on the carbon content of carbon steel materials.
1.1 Low carbon steel C% 0.25% is usually called A3 steel in China. It is basically called 1008, 1015, 1018, 1022, etc. abroad. Mainly used for grade 48 bolts, grade 4 nuts, small screws and other products without hardness requirements. (Note: 1022 material is mainly used for drill tail screws.
1.2 Medium carbon steel 0.25%<C%<0.60% is usually called No. 35 and No. 45 steel in China, and basically called 1035, CH38F, 1039, etc. abroad. Mainly used for grade 8 nuts, grade 8.8 bolts and grade 8.8 inner hexagon products.
1.3 High carbon steel C% 20.60%. Basically not used in the market at present
14 Alloy steel: Add alloy elements to ordinary carbon steel to increase some special properties of steel: such as 35, 40 chromium molybdenum, SCM435, 10B38, Fangsheng 12.9 grade screws mainly use SCM435 chromium molybdenum alloy steel, the main components are C.Si, Mn.
P.S.Cr.Moo
2 Stainless steel. Performance grade: 45, 50, 60, 70, 80 mainly divided into austenite (18%Cr, 8%Ni), good heat resistance, good corrosion resistance, and good weldability. A1, A2, A4 martensite (13%Cr) has poor corrosion resistance, high strength and good wear resistance. C1, c2, c4 ferritic stainless steel. 18%Cr shovel has better forgeability and better corrosion resistance than martensite. Currently imported materials on the market are mainly Japanese products. According to the grade, it is mainly divided into SUS302, SUS304 and SUS3163 copper. Commonly used materials are brass and zinc-copper alloy. The market mainly uses H62, H65, H68 copper as standard parts.
4 Aluminum alloy has low density, but relatively high strength, close to or exceeds high-quality steel, good plasticity, can be processed into various profiles, has excellent electrical conductivity, thermal conductivity and corrosion resistance, is widely used in industry, and the amount of use is second only to steel.
Alloy steel (also narrowly refers to Ming Mo alloy steel, such as SCM435, etc.

Scan the QR code to read on your phone

Related news

Anti-loosening

Anti-loosening screw technology "Good-resistant" anti-loosing screw technology

Screws are a common term for fasteners, a daily spoken word. Screws are indispensable industrial necessities in daily life: such as very small screws used in cameras, glasses, clocks, electronics, etc.; general screws for televisions, electrical products, musical instruments, furniture, etc.; as for engineering, construction, and bridges, large screws are used , Nuts; transportation equipment, airplanes, trams, cars, etc. are used for both large and small screws. Screws have important tasks in industry. As long as there is industry on the earth, the function of screws is important.
2021-07-21
High-strength

High-strength fastener production process

The production process of high-strength threaded fasteners is raw material reformation-cold-sensitive forming → thread processing (thread rolling or thread rolling) → heat treatment → surface treatment → sorting and packaging. Generally, the process of thread rolling after heat treatment is used above 10.9.
2021-07-21
Common

Common fastener materials and uses

1. Classification of commonly used materials of Ziwei: At present, the standard parts on the market mainly include carbon steel, stainless steel, brass, and aluminum alloy.
2021-07-21
Carbon

Carbon steel hot-rolled round steel for standard parts

"Carbon Steel Hot Rolled Round Steel for Standard Parts" is a standard formulated by the China Standardization Management Committee, and its implementation date is 1990-1-1.
2021-07-21

CONTACT US

Add:  No.233 Changan Road .Haiyan.Jiaxing.Zhejiang.China.

E-mail:barton@hi-fine.com

              barton203@aliyun.com

  • Contact us
  • Support hotline 0086-573-86119517
  • TOP

WEBSITE QR CODE

Hifine

MESSAGE

Username used for comment:
Feedback of customer
Description:
验证码

© 2021 JIAXING HIFINE INTERNATIONAL ENTERPRISE CO.,LTD.  All Rights Reserved    浙ICP备18030330号-3   Powered by www.300.cn